Thermal Power Generation & Zirconia & Gas Measurement & Combustion Optimizing System Analyzer - Analytical Instruments manufacturers & Supplier | Walsn

CN / EN

Home - Product - Analyzers

Combustion Efficiency Analyzer Walsn CEA-100
High Accuracy & DurabilityWalsn CEA - 100 combustion efficiency analyzer is designed to continuously monitor CO content in flue gas while the measurement data can be used to adjust the ratio of fuel/ air so as to achieve the maximum boiler efficiency for boiler operation. Walsn CEA - 100 adopts the dual-measuring-sensor technology and features high accuracy with low zero drift and very small failure rate, matching the requirements of the harsh industrial environment. It is also easy to install and maintain.

More+
FSE-100 Integral Explosive-proof Intelligent Flame Detector
FSE-100 Explosion-proof Flame Detector is used to collect the flame signal which is amplified and processed to determine the presence or absence of flame，integrating with ultra-violet (UV) and infra-red (IR) sensors. FSE-100 Flame Detector provides the flame output in real-time – the basis of determining the presence or absence of flame. The detector is suitable for both oil and coal fired applications.

More+
FS-100 Integral Intelligent Flame Detector
FS-100 utilizes SMT technology which integrates a photoelectric sensor, a microprocessor, and a Human-Computer Interface (HCI) and an output interface together, sending out various outputs including an ON/OFF flame signal, a fault signal, a 4-20mA signal, and an RS-485 output (meets the MODBUS standard) via the quick connector.

More+
Mill & Silo Monitoring System
Walsn Mill & Silo Monitoring system (MSM-100) is specifically designed to continuously detect carbon monoxide (CO) in pulverizing mills. This system has been developed to detect high levels of CO, produced by any incomplete combustion, effectively giving advance warning of a potential mill fire.

More+
Portable Sulphuric Acid Dewpoint Temperature Monitor
The acid dewpoint of a flue gas is the temperature, at a given pressure, at which any gaseous acid in the flue gas will start to condense into liquid acid.

More+
FDS-600 Remote Flame Detector
FDS-600 Remote Flame Detector consists of two units：FDS-601 flame detector and FDS-602 control unit.

More+
Oxygen Analyzer
OAM-800, OAM-800-R and OAM-802 are ideal for continuously measuring the oxygen concentration of flue gas in boilers and furnaces. Walsn OAM is a stand-alone oxygen analyzer, which allows the zirconium oxide cell directly placed into the stream of flue gases.

More+