UniMass-V

1. Overview

Walsn TS series Coriolis mass flowmeters are a new generation of Coriolis meters with twin triangular flow tubes. The TS series is equipped with a transmitter utilizing a digital signal processor (DSP), integrated with digital closed-loop vibration control (DLC), which performs real-time calculations and continuously monitors conditions of the flow sensor. Featuring higher sensitivity, the TS series provides high accuracy measurement, a higher turn-down and excellent stability. Online system configuration, diagnostics and data recording can be handled directly through a Hart communicator or Modbus.

The TS Series flowmeter not only provides mass flow rate, but also simultaneously measures density, temperature, volumetric flow rate, total flow and component fractions online and in real-time.

2. Features

◆ Triangular tube shape amplifies the effect of Coriolis force, giving higher sensitivity

◆ Dedicated ASIC with digital closed-loop control (DLC) improves the performance of flow measurement

◆ Dynamic vibration balance (DVB) technology enhances the system stability

◆ 2-point temperature compensation and process pressure compensation

3. Applicable Fluids

◆ Gases

◆ Slurries

◆ Liquids

4. Typical Applications

◆ Custody transfer

◆ Reactor feed ratio

◆ Density measurement

◆ Batch control

5. Environmental Conditions

◆ Power consumption: ≤ 20W

◆ Enclosure rating: IP65, IP67, IP68 (Remote Style Options only)

◆ Vibration limits:

a) a = 0.5g

b) Endurance sweep, under the condition of 20Hz ~ 400Hz frequency for 50 sweep cycles

◆ Impact limits: If the flow meter is well-packed, its performance will not be affected by the following impacts:

a) Acceleration: 50m/s²

b) Impact frequency: 60 times/min ~100 times/min

c) Impact: 1000 times

◆ Ex approval: Ex d ib IIC T6 Gb

◆ Electromagnetic/Electrostatic compatibility

a) Electrostatic discharge: level 3

b) Electrical fast transient/burst (EFTB) resistance: level 3

6. Specifications